Lite-on Network Speed Test

Method 1: Download and install the Lite-On USB Wireless 802.11 b/g adapter driver in compatible mode and check if it helps. A) Right click on the program you want to install in compatible mode. B) Go to Properties. C) Under Compatibility Tab, Check the option “Run this program in compatibility mode for”. Kaspersky platform, powered by neural network, answers questions of tomorrow Posted 3-Feb-2021 10:11 Countdown launches micro-fulfilment tech to make online shopping five times faster Posted 3-Feb-2021 10:04 Disney+ Star to launch in New Zealand 23 February Posted 28-Jan-2021 16:06 Sony introduces the Alpha 1 camera Posted 28-Jan-2021 12:08. LITE-ON SERVICE USA, INC. LITE-ON TRADING USA, INC. For CD/DVD Products please go to: www.liteonit.com Copyright © 2020 Lite-On, Inc. All Rights Reserved. After connecting the RJ45 wall faceplate next to my network cabinet in the garage, I used a network tester to make sure that all of the wires were connected properly (they weren't and I had to rewire the AP RJ45 connector, whoops!) Eventually it was all connecting OK and the AP was getting power via the network and shining its nice blue colour.

Lite-on Network & Wireless Cards Driver Download For Windows

By default Vera automatically configure it's network, in your case if you connect it to your router it will automatically configure in switch mode.
From the logs I've noticed that your router assigned 198.168.1.100 ip to your Vera unit, which is wrong because it's an internet IP ( it should be 192.168.1.100 ),
and because of this Vera will auto configure in gateway mode with firewall active and you won't be able to reach it and on findvera.com
and you'll see 'Vera not found on your home network' message.
Please follow this steps to fix it:
- unplug Vera from the power cord
- unplug all the cables from Vera
- plug a cable from your computer into Vera's LAN 1 port
- plug Vera into the power cord
- wait it to start and for your computer to get an ip address:
+ on windows you can type this in Start->Run to view it: cmd /K ipconfig
+ on linux and windows you have to start an command line and type there ifconfig | grep -B1 'inet addr'
+ by default you should receive an ip from Vera that should be in this range 192.168.81.100 - 192.168.81.254
- if you've changed the default LAN IP in Vera you'll receive an IP from that range
- if you've disable Vera's dhcp server you won't receive any ip and you'll have to setup one manually on you pc
that should be in Vera's subnet ( ie: if you've left default ip lan settings but disable dhcp you'll have to put on your pc an ip like 192.168.81.2 )
+ after you have an ip on your PC and you can ping Vera's ip successfully open an web browser and type this:
http://192.168.81.1 or http://<and_the_ip_that_you've_set_on_your_Vera_LAN_side_in_Net&Wi-Fi_page>
- Vera's web interface should open and then go to Setup->Advanced->Net&Wi-Fi
+ check the Internet settings:
- if you let it to DHCP, your primary router should assign an IP address to Vera
- if you don't have a dhcp server you can set it to Static and manually set an IP to your Vera
+ Firewall
- if you connect your Vera to another router you have to set it to No Firewall (bridge)
- if Vera is directly connected to the cable modem set the Firewall to Active
* more informations can be found on this manual page: http://wiki.micasaverde.com/index.php/Networking_Setup
+ LAN
-DHCP Server: off - if you connect vera to another router
on - if you connect Vera directly to the internet
- IP address: - this is Vera's lan ip address, this SHOULDN'T be the same or in the same subnet as it's Internet IP or as other router that's on your network
- you can reach Vera on this IP only if the firewall is in 'No Firewall (bridge)' mode and you're connecting to one of the LAN ports of Vera
- Press Save and Apply only if you've done any changes. Pressing this will disable the auto-network configure function!!! So if you connect right now your Vera to another router
and the firewall is set in bridge mode and then you connect your Vera to your cable mode, you'll have to manually set Vera's firewall to Active or No Firewall in order to have
internet access on your PC also.
- connect the WAN port of your Vera to your other router or cable mode.
+ if you connect it to a cable modem: the first time you'll have to power cycle the cable mode, wait for it to synchronize and then plug Vera's cable in it
+ if you connect it to another router, it will switch in bridge mode, you'll get another ip from your main router and you won't be able to access its UI
- you'll have to reconnect to it's Internet ip which you've setup manually or it was released by your main router dhcp server
- or if you have your pc connected to the internet and Vera is also connected to the internet ( the power led is solid ) you can go to
http://findvera.com and click on 'Configure Vera on my home network'
Zenith driver download for windows. In order to activate the findvera.com service you'll have first to connect directly to your Vera and the go to Setup->FindVera.Com page and set it up.

Lite-on Network Remote

Retrieved from 'http://wiki.micasaverde.com/index.php?title=Networking_Setup:Troubleshooting&oldid=2323'